Dell EqualLogic FS7610 with FluidFS v4

Optimizoni storage-in e dosjeve me pajisjen EqualLogic FS7610 NAS dhe shkallezueshmerine, fleksibilitetin dhe eficencen e sistemit te dosjeve FluidFS v4.


  • Përshkrimi i produktit

    • Storage arrays supported
      New or existing Dell Storage PS arrays with version 8.1 firmware or greater
    • Capacity and bandwidth expansion
      Up to 509TB usable file capacity in a single name space. One or two FS7610 appliances in a NAS cluster.Two Intel 10GbE dual-port NICs per controller. 10GbE can be either SFP+ or Base-T standards, and accommodate both copper and optical connectivity.Client connectivity over Ethernet, SAN connectivity over iSCSI Ethernet switch is required; direct connect to the SAN is not supported.
    • NAS appliance
      Each NAS appliance has a pair of controllers in an active-active configuration, using cache mirroring and an integrated backup power supply. Each controller contains 24GB auto-adaptive R/W RAM- based cache and two quad core Intel® processors.Management
      PS Series Group Manager graphic user interface (GUI), command line interface (CLI)Data Protection features
      Dual controller active-active NAS appliance, redirect-on-write, user recoverable snapshots, point-in-time replication, NAS container cloning, NDMP backup, antivirus, battery-based BPS, access based enumerationMemory size
      Each controller has 24GB of memory (48GB per appliance) and its own backup battery that provides power sufficient to de-stage cache contents to a non-volatile internal storage device in the event of a power failure.Protocol support
      Server Message Block (SMB) 3.0, Network Files System (NFS) v4.1, iSCSI, Network Data Management Protocol (NDMP) 4, Active Directory, Lightweight Directory Access Protocol (LDAP), NIS (Network Information Service (NIS), Network Time Protocol (NTP), Simple Network Time Protocol (SNTP), Simple Network Management Protocol (SNMP), Address Resolution Protocol (ARP), Link Aggregation (IEEE 802.3ad), Adaptive Load Balancing (ALB)

      Multi-client subnet support
      Configure multiple client networks and VLANs to present NFS exports or CIFS shares

      User authentication
      For SMB clients: Kerberos v5 and NTLM v2 on Microsoft Active Directory Server; for NFS v4 clients: Kerberos 5 on AD and SASL support for encryption, NFS v4 Access Control Lists

      Certified Backup Software
      Dell NetVault Backup 8.6x and 9.0x, Symantec BackupExec 2010 R3 and 2012, Symantec NetBackup 7.0 or later, CommVault Simpana 9.0 or later, IBM Tivoli Storage Manager 6.3

      Qualified antivirus software
      Symantec ScanEngine 5.2 , Symantec Protection Engine 7.0, McAfee Virus Scan Enterprise 8.8 and Enterprise for Storage 1.0.2; Sophos Endpoint Security and Control 10.0; TrendMicro InterScan Web Security Suite 3.1

      Directory Services
      Microsoft Active Directory Domain Services, LDAP and NIS

      Windows Features
      LDAP Signing, SMB Signing, Roaming Profiles, Hidden Shares, Access Based Share Enumeration

      Qualified SAN switches
      Refer to

    Technical Highlights

    • Deduplication and compression
      Policy-driven variable-block deduplication and LZPS compression, Deduped data can be rehydrated on read
    • Thin provisioning
      Space can be over-allocated based on customer needs for more efficient capacity planning.
    • Client network connectivity
      4 x 10Gb SFP+ or Base-T Ethernet
    • Storage Area Network connectivity
      4 x 10Gb SFP+ or Base-T Ethernet
      Direct connect to the SAN is not supported.
    • Min NAS Cluster size
      512GB for a single appliance; 1024GB for a two appliance clusterMax NAS Cluster size
      509TBMin/max NAS container size
      20MB/509TBMax files in a cluster
      64 billion per applianceMax NAS Containers

      Max file size
      10 TB

      Max file name length
      255 bytes

      Maximum number of directories in a cluster
      64 billion

      Maximum directory depth

      Max NFS mounts
      1024 (one or two FS7610 appliances)

      Max CIFS shares
      1024 (one or two FS7610 appliances)

      Max concurrent CIFS connections
      10,000 per NAS appliance, 20,000 for a two appliance cluster

      Max Quota rules per NAS Container (user quotas)
      1000 per NAS container

      Max Quota rules per cluster (user quotas)
      1000 per NAS cluster

      Max local users in a NAS cluster

      Max local groups in a NAS cluster

      Redirect-on-write snapshots

      Max snapshots per NAS container/cluster

      Maximum containers enabled for replication in a NAS cluster

      Max simultaneous replicated containers

      Max schedules per NAS cluster

      Backups using NDMP v4

      3rd Party anti-virus applications are supported via ICAP


    • Wattage
      717W output per appliance
    • Voltage
      90 V AC to 264V AC, autoranging, 47 Hz/63 Hz. Note: This system is also designed to be connected to IT power systems with a phase to phase voltage not exceeding 230 V.
    • Heat dissipation
      2446 BTU/hr. Note: The heat dissipation is calculated using the power supply wattage rating. The heat dissipation values are for the entire system which includes (chassis and two controllers).
    • Maximum inrush current
      Under typical line conditions and over the entire system ambient operating range, the inrush current may reach 55 A per power supply for 10 ms or less


    • Chassis Physical Specifications (per dual controller appliance)Height2U / 86.4 mm (3.4 inches)


      481.50 mm (18.96 inch) with rack flange.
      446.3 mm (17.6 inches)—Does not include rack flange.
    • Depth
      741.0 mm (29.2 inches)—Without bezel and handle
      813.0 mm (32.0 inches)—With bezel and handle
    • Weight (Maximum configuration)
      30.5 kg (67 lbs)
    • Rack Support
      ReadyRails II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racks

    Environmental Operating Conditions

    • Temperature Continuous operation:5°C to 40°C (41°F to 104°F) with a maximum temperature gradation of 20°C per hour.
    • Storage:
      -40°C to -60°C (–40°F to 140°F) with a maximum temperature gradation of 20°C per hour.
    • Relative humidityOperating:
      20% to 80% (non-condensing) with maximum humidity gradation of 10% per hour at maximum wet bulb temperature of 29°C (89°F)Non-operating:
      5% to 95% with a maximum humidity gradation of 10% per hour at a maximum wet bulb temperature of 38°C (100°F)Maximum vibration

      0.26 Grms (5 Hz – 350 Hz @ 0.0002G2/Hz) in operational orientation for 5 minutes (maximum)Non-operating:
      1.88 Grms with the following PSD profile (all 6 sides tested for 15 minutes each side)Frequency (Hz) G2/Hz
      10 0.13
      20 0.13
      70 0.004
      130 0.004
      165 0.0018
      500 0.0018

      Maximum shock

      31G half-sine shock +/-5% with pulse duration of 2.6ms +/- 10% in the operational orientation (Maximum)

      Square wave shock of 27 G, at 235 inches/second (596.90 cm/second) velocity change (all six sides tested)

      Operating altitude

      -16 to 3048 m (-50 to 10,000 feet)
      For altitudes above 2950 feet, the maximum operating temperature is derated 1°F/550 feet.

      –15.2 m to 10,668 m (–50 ft to 35,000 ft)

      Airborne Contaminant Level Class
      G1 as defined by ISA-S71.04-1985

  • Reviews

    There are no reviews yet.

    Be the first to review “Dell EqualLogic FS7610 with FluidFS v4”

Kategoritë e produkteve

Zgjidh sipas Brand-it